Operational Reporting
Workover & Completion Report Package (Canada)
Workover & Completion Report Package (USA)
Safety Incident Report Form
Pumpdown Report
Tubing & Rod Report USA & Canada
Frac Report
Daily Operations Report USA & Canada
Balance Plug Workbook & Calculation Sheets
Field Checklists & Templates
Daily Site Safety Inspection
Equipment Maintenance Log
Pre-Task Hazard Assessment
Operational Audit Template
Technical Resources
Wellsite Operations Field Handbook
Temperature Conversion Tool (°F to °C)
AGA Gas Rate Calculator (Lanmark)
Fluid Loss Calculator
Nitrogen Handbook (PDF)
Bottoms Up Calculator (Bryan McKinley, Thru Tubing Solutions)
{28} Relative Permeability
{29} Petroelum Reservoir Traps
{30} Bottom Hole Pressure
{31} Temperature in Wells
{32} Potential Oil Well Tests
{33} Open Flow, Gas Wells
{34} Wellbore Hydraulics
Drill Line Ton-Mile Calculator
Bottoms Up Calculator
Tally and Free Point Calculator
Generic Incident Report
Industry Standard Guides
{57} Oil & Gas Leases
Everything below is free except the Handbook in PDF format.
Handbook in PDF
Professional Wellsite Consultant Handbook Available in PDF
PDF | 12.6 MB
Reporting Package Canada
Comprehensive reporting package for Canadian Oil & Gas operations
Excel | 2,828 KB
Reporting Package USA
Comprehensive reporting package for USA & Canada operations
Excel | 2,828 KB
Incident Report
Generic Incident Report Template
DOCX | 450 KB
Pumpdown Report
Generic Pumpdown Report Worksheet
Excel | 21 KB
Temperature Conversion Calculator
Farenheit to Celsius Conversion Calculator
Excel| 1.1 MB
Gas Rate Calculator
Gas Rate Calculator from Lanmark Pet Services
Excel | 21 KB
Tubing & Rod Report
Generic Tubing and Rod Report USA & Canada
Excel | 21 KB
Frac Report
Generic Well Stimulation Frac Report
Excel | 19 KB
Daily Operations Report
Generic Daily Operations Report USA & Canada
Excel | 129 KB
Balance Plug
Balanced Plug & Retainer Calculation Workbook
Excel | 529 KB
Generic Incident Report
A second Blank Incident Report Form
Word | 57 KB
Technical Resources
Fluid Loss Calculator
Calculates fluid loss/gain during drilling operations and cleanouts
Excel | 64 KB
Nitrogen Handbook
Handy reference for all things Nitrogen and high pressure gas
PDF | 9.84 MB
Bottoms Up Calculator
Authored by Thru Tubing Solutions (Bryan McKinley)
Excel | 32.8 KB
Relative Permeability
Excerpt from existing Oil & Gas Industry Manual
PDF | 1.67 MB
Reservoir Traps
Technical guide on petroleum reservoir structures
PDF | 1.01 MB
Bottom Hole Pressures
Critical technical data on reservoir pressure dynamics
PDF | 1.56 MB
Temperature in Wells
Comprehensive analysis of thermal profiles in deep wells
PDF | 745 KB
Potential Oil Well Tests
A potential test is a simple production test under stabilized
flowing conditions to determine the ability of a well
to produce. Potential or production tests are used to
determine the rate of production through a given size of the choke.
PDF | 1.6 MB
Open Flow, Gas Wells
Comprehensive analysis of testing and flowing gas wells with BH Recorders studied
PDF | 2.28 MB
Wellbore Hydraulics
The branch of production engineering that deals with the motion of fluids (oil, gas, and water) in tubing, casing, or the annulus between tubing and casing.
PDF | 5.41 MB
Oil & Gas Leases
Analytical discussion of Oil & Gas Leases in the USA
PDF | 1.66 MB
Drill Line Ton-Mile Calculator
Provides a handy tool to calculate ton-miles on drill line
Excel | 20 KB
Bottoms Up Calculator
By Thru Tubing to calculate bottoms up for coil/conventional cased hole ops
Excel | 33 KB
Tally & Free Point Calculator
Calculations for tension, compression, sand fill, sacks to bbls and more
Excel | 415 KB